“数字海底”--海底数据集成管理与可视化研究     

肖鹏  王悦东  李安龙 《海洋信息》2020,35(1):40-45,51

针对目前"数字海底"建设中存在海底调查数据集成管理与三维可视化表达不足等问题,本文采用GIS技术,以黄河水下三角洲埕北海域为研究对象,利用地理空间数据集成理论与三维建模方法,建立了埕北海域三维海底空间数据库,实现了研究区域地形数据、地层数据、钻孔数据、表层沉积物数据的有效组织管理与可视化,并在此基础上,采用ArcGIS Engine 10.0,结合.NET平台,在Visual Studio 2010开发环境下,利用C#语言进行了二次开发,实现了基于C/S (Client/Server)架构的三维海底虚拟仿真系统的开发,设计了一套面向埕北海域的三维海底虚拟仿真原型系统。  相似文献   

基于GPU加速的Boussinesq类波浪传播变形数值模型     

孙家文  朱桐  房克照  刘忠波 《海洋工程》2020,38(2):111-119

Boussinesq波浪模型是一类相位解析模型,在时域内求解需要较高的空间和时间分辨率以保证计算精度。为提高计算效率,有必要针对该类模型开展并行算法的研究。与传统的中央处理器(CPU)相比,图形处理器(GPU)有大量的运算器,可显著提高计算效率。基于统一计算设备架构CUDA C语言和图形处理器,实现了Boussinesq模型的并行运算。将本模型的计算结果同CPU数值模拟结果和解析解相比较,发现得到的结果基本一致。同时也比较了CPU端与GPU端的计算效率,结果表明,GPU数值模型的计算效率有明显提升,并且伴随数值网格的增多,提升效果更为明显。  相似文献   

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode     

Shengming Hu  Zhijian Chen  Chenghui Wan  Chun Tang  Wen Xiong 《Marine Georesources & Geotechnology》2020,38(4):385-392

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.  相似文献   

NaHSO3对两种微藻生长及胞外多糖和藻胆蛋白含量的影响     

梁英  闫译允  黄徐林  田传远  胡乃霞  王帅 《中国海洋大学学报(自然科学版)》2020,(1):21-29

本文研究了0.25~3 mmol/L浓度的NaHSO3对紫球藻(Porphyridium violaceum)和0.06~0.96 mmol/L浓度的NaHSO3对蓝隐藻(Chroomonas placoidea)的叶绿素荧光参数(PSII最大光能转化效率Fv/Fm、相对电子传递速率rETR、光化学淬灭qP、非光化学淬灭NPQ)、细胞密度、干重、胞外多糖和藻胆蛋白含量的影响。研究表明,较低浓度的NaHSO3对紫球藻和蓝隐藻的生长及活性物质积累有促进作用,2种微藻进行生长和活性物质积累的最适NaHSO3浓度分别为0.5和0.12 mmol/L,此条件下,实验结束时,2种微藻的Fv/Fm、rETR、qP、细胞密度、干重、胞外多糖和藻胆蛋白含量均达到最大值,显著高于对照组。其中,紫球藻的最终细胞密度、干重、胞外多糖和藻胆蛋白含量分别比对照组增加了36.0%、19.1%、71.8%和69.0%。蓝隐藻的上述参数在NaHSO3浓度为0.12 mmol/L时则比对照组增加了60.8%、45.4%、60.0%和53.1%。另一方面,NaHSO3浓度为2~3 mmol/L时显著抑制紫球藻生长及活性物质积累,NaHSO3浓度为0.48~0.96 mmol/L则不利于蓝隐藻生长及活性物质积累。研究结果表明,适合紫球藻和蓝隐藻生长及胞外多糖和藻胆蛋白积累的最佳NaHSO3浓度分别为0.5和0.12 mmol/L,该研究为2种微藻的开发利用提供了理论依据。  相似文献   

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析     

胡小鹏 《山东国土资源》2020,36(5):38-43

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。  相似文献   

频率域海洋可控源电磁垂直各向异性三维反演   总被引：1，自引：0，他引：1       下载免费PDF全文

彭荣华  胡祥云  李建慧  刘亚军 《地球物理学报》2019,62(6):2165-2175

地层宏观电性各向异性会对可控源电磁响应产生重要影响.由于海底地层电性结构常表现为电导率各向异性，若仅对海洋可控源电磁（MCSEM）数据进行常规各向同性反演，有可能无法获得准确的反演解释结果，从而削弱MCSEM技术的可靠性.本文实现了电导率垂直各向异性（VTI）条件下频率域海洋可控源电磁数据三维反演算法.其中，三维正演采用基于二次场控制方程的交错网格有限体积法，并利用直接矩阵分解技术来求解离散所得的大型线性方程组，有利于快速计算多场源的响应.反演采用具有近似二次收敛性的高斯牛顿算法对目标函数进行最优化.最后，对具有VTI电性各向异性特征的盐丘构造模型的MCSEM合成数据分别进行了电导率各向同性和垂直各向异性三维反演，结果表明：各向同性三维反演算法无法对受VTI介质影响的MCSEM数据进行正确的反演解释，而垂直各向异性三维反演能够获得更为可靠的地下电阻率结构和异常体分布，展现出对海底电性各向异性结构更为优良的反演解释能力.  相似文献   

APPLYING 3D INVERSION OF SINGLE-PROFILE MAGNETOTELLURIC DATA TO IDENTIFY THE SHADE AND YUNONGXI FAULTS          下载免费PDF全文

JIANG Feng  CHEN Xiao-bin  DONG Ze-yi  CUI Teng-fa  LIU Zhong-yin  WANG Pei-jie 《地震地质》2019,41(6):1444-1463

Many synthetic model studies suggested that the best way to obtain good 3D interpretation results is to distribute the MT sites at a 2D grid array with regular site spacing over the target area. However, MT 3D inversion was very difficult about 10 years ago. A lot of MT data were collected along one profile and then interpreted with 2D inversion. How to apply the state-of-the-art 3D inversion technique to interpret the accumulated mass MT profiles data is an important topic. Some studies on 3D inversion of measured MT profile data suggested that 2D inversions usually had higher resolution for the subsurface than 3D inversions. Meanwhile, they often made their interpretation based on 2D inversion results, and 3D inversion results were only used to evaluate whether the overall resistivity structures were correct. Some researchers thought that 3D inversions could not resolute the local structure well, while 2D inversion results could agree with the surface geologic features much well and interpret the geologic structures easily. But in the present paper, we find that the result of 3D inversion is better than that of 2D inversion in identifying the location of the two local faults, the Shade Fault(SDF)and the Yunongxi Fault(YNXF), and the deep structures. In this paper, we first studied the electrical structure of SDF and YNXF based on a measured magnetotelluric(MT) profile data. Besides, from the point of identifying active faults, we compared the capacity of identifying deep existing faults between 2D inversion models and 3D models with different inversion parameters. The results show that both 2D and 3D inversion of the single-profile data could obtain reasonable and reliable electrical structures on a regional scale. Combining 2D and 3D models, and according to our present data, we find that both SDF and YNXF probably have cut completely the high resistivity layer in the upper crust and extended to the high conductivity layer in the middle crust. In terms of the deep geometry of the faults, at the profile's location, the SDF dips nearly vertically or dips southeast with high dip angle, and the YNXF dips southeast at depth. In addition, according to the results from our measured MT profile, we find that the 3D inversion of single-profile MT data has the capacity of identifying the location and deep geometry of local faults under present computing ability. Finally, this research suggests that appropriate cell size and reasonable smoothing parameters are important factors for the 3D inversion of single-profile MT data, more specifically, too coarse meshes or too large smoothing parameters on horizontal direction of 3D inversion may result in low resolution of 3D inversions that cannot identify the structure of faults. While, for vertical mesh size and data error thresholds, they have limited effect on identifying shallow tectonics as long as their changes are within a reasonable range. 3D inversion results also indicate that, to some extent, adding tippers to the 3D inversion of a MT profile can improve the model's constraint on the deep geometry of the outcropped faults.  相似文献   

CTS-1E、CMG-3ESPC-120型地震计工作参数对比分析     

段绍鑫  乌尼尔  李晓东  张森  张小飞 《地震地磁观测与研究》2019,40(4):120-124

CTS-1E型、CMG-3ESPC-120型地震计安装架设在库尔勒地震台小泉沟观测点同一台基上，均使用EDAS-24GN型数据采集器进行实时数据采集，对比分析观测数据波形特征、地动噪声功率谱及动态范围等，明确2套地震计在实际观测中的性能差异，以便为地震监测数据分析及相关研究提供参考。  相似文献   

基于MPI并行算法的电阻率法多种装置数据的三维联合反演          下载免费PDF全文

马欢  郭越  吴萍萍  谭捍东 《地球物理学报》2018,61(12):5052-5065

由于地表电阻率法受到浅地表局部异常体的干扰，反演精度受到影响，井中装置数据资料参与反演虽然可以减小浅地表局部异常体的干扰，但是由于钻井位置的局限性，数据量得不到保障，也会导致反演精度降低.为此，本文开发了一套结合地表、地-井、井-地和井-井装置数据的三维联合反演算法.首先，利用有限差分法实现正演模拟，采用非线性共轭梯度法（NLCG）恢复电阻率结构；其次，调用Message Passing Interface（MPI）函数库加速正演模拟和灵敏度矩阵运算，当开辟12个进程时，反演程序获得最大加速比4.51；最后，通过合成数据和实测数据算例证明该反演算法的有效性，也证实了多种装置组合数据体反演结果明显优于单一地表装置数据体反演结果.  相似文献   

基于三维激光扫描技术的钢结构扰度检测及应用     

宋云记  王晓民  王智 《测绘通报》2020,(12):160-163

钢结构在长期荷载及不均匀受力的作用下会产生空间变形，其中扰度是其重要的衡量指标。通常采用全站仪采集钢结构轴线上若干特征点进行分析、计算，由于钢结构特征点难以捕捉，测量存在误差，并且有限的空间离散点难以全面反应钢结构空间变形。本文采用徕卡RTC360三维激光扫描进行钢结构扰度测量；介绍了其作业流程及数据处理方法；利用标靶将各个测站的三维点云拼接成一个整体；采用拟合的方法提取空间特征点及轴线；利用三维点云构建空间模型，并与设计模型进行碰撞分析；可全面地反映钢结构的空间变形情况。  相似文献